Plan Your New Outdoor Living Space! Talk To A Landscape Designer From Our Design & Build Group, Villa Landscapes

Retaining Wall Accessories

A single-component, non-sag elastomer, VERSA-LOK Concrete Adhesive is designed for use in non-traffic bearing joints, including those where structural movement or stress is expected. Each VERSA-LOK Concrete Adhesive cartridge contains enough adhesive to cap approximately 14 lineal feet of wall.VERSA-LOK Concrete Adhesive

Provides a permanent yet flexible bond to secure cap units, steps, corners and all unpinned retaining wall units. A 11-oz. cartridge is sufficient for capping approximately 14 lineal feet of wall. Download PDF for more information.

VERSA-LIFTER

The VERSA-Lifter makes it easier to lift and place wall units, especially on the base course. The two prongs on the lifter are placed into the holes in the VERSA-LOK Standard unit. The action of lifting the handle secures the lifter to the unit and makes for easy, balanced lifting and placement. Installation of VERSA-LOK retaining walls is a breeze when VERSA-Lifter is on the job. Its patented design, made exclusively for VERSA-LOK products, provides balanced lifting and accurate placement of units, especially for base-course installation.

VERSA-TUFF Pins

VERSA-TUFF fiberglass-reinforced nylon pins are high-strength, durable, inert and noncorrosive. VERSA-TUFF pins provide mechanical interlock of VERSA-LOK retaining wall units and a positive connection of VERSA-LOK units to geogrid soil reinforcement. VERSA-TUFF pins also simplify the installation of VERSA-LOK retaining walls through a unique top-pinning, hole-to-slot systemFor use with VERSA-LOK Standard and Cobble retaining wall systems (2 pins per unit).

VERSA-TUFF Snap-off Pins and Mini Pins

 VERSA-TUFF Snap-Off Pins are used with VERSA-LOK Accent retaining wall units and in VERSA-LOK Mosaic® retaining walls. VERSA-TUFF Snap-Off pins are designed to accommodate the varying heights of units within Mosaic panel. The full-length of these pins is used for the 6-inch-high Standard and Cobble units. When pinning through the shorter 4-inch-high Accent units, the top two inches of the VERSA-TUFF Snap-Off Pin above the unit is easily snapped off. VERSA-TUFF Snap-Off pins are 6.8 in. tall, 4.63 in. at snap-off height, and 0.48 in. in diameter. Used with VERSA-LOK Mosaic retaining wall systems (8 snap-off pins per Mosaic panel).

VERSA-LOK Soil-reinforcement Fabric *

VERSA-LOK Fabric is ideal for soil reinforcement of shorter walls. This geotextile is both cost-effective and easy to install. It is available in convenient, ready-to-use roll sizes.VERSA-LOK Soil Reinforcement Fabric is an economical, easily installed geotextile designed to provide the additional soil reinforcement necessary for retaining walls up to 8 feet tall. Download PDF for more information.

Engineered for durability and long life, VERSA-Grid® geogrid is a high-performance soil reinforcement composed of high-molecular-weight, woven polyester yarns with a polymeric coating. Properly designed VERSA-LOK walls with VERSA-Grid soil reinforcement can be constructed to heights of 50 feet or more.VERSA-GRID 1.5 Soil Reinforcement *

VERSA-GRID 1.5 provides the additional soil reinforcement necessary for structural wall integrity when the weight of your retaining wall units alone is insufficient to meet your engineering needs. Download PDF for more information.

* Important
Any soil-reinforced wall must be designed by a qualified licensed engineer. The soil reinforcement strength, length and vertical spacing of VERSA-GRID will vary depending on local site and soil conditions. VERSA-GRID technical literature, design strengths and engineering assistance is available from VERSA-LOK at (800) 770-4525.