Installation Steps for VERSA-LOK Mosette

Step 5 Place and Glue Succeeding Courses
Prior to applying adhesive, test position your next course of Mosette. Align units to create a vertical wall and do your best to stagger unit joints from course to course for improved wall strength. When you are satisfied with the unit arrangement, set aside the temporarily placed units, preserving their order. Sweep off any debris on installed Mosette units. Spread a ¼ -inch bead of VERSA-LOK Concrete Adhesive in a wavy pattern of the top surface of installed units. Replace "tested" Mosette units on the adhesive. Repeat with remaining courses. Remember, the exposed height of a Mosette freestanding wall (including the height of cap units) should not exceed 24 inches.

Step 6 Place and Glue Cap Units
If desired, VERSA-LOK cap units can be used to finish the top of your Mosette wall. To create the proper 10-inch depth, split the rear 2 inches off using a masonry chisel and heavy mallet or rented mechanical splitter. Caps are tapered on both sides. Like Mosette units, caps can be arranged to create straight and curved configurations. Glue cap units to the wall using VERSA-LOK Concrete Adhesive.