Wall Installation Steps

Installation Steps for VERSA-LOK Mosaic

Step 1, Tools, Materials and Preparation

The following tools will be helpful in building your VERSA-LOK Mosaic retaining wall system:

• The Mosaic system uses VERSA-LOK Standard, Cobble, and Accent units. The Versa-Lifter is a tool that makes it easy to lift and place VERSA-LOK Standard units—especially on the base course.

• A 4-foot level will help keep your units level lengthwise, and a smaller torpedo level is helpful to keep them level front to back.

• A stringline stretched behind your wall will help you maintain a straight wall.

• A finishing trowel will help ensure a smooth, even layer of sand on top of your leveling pad.

• You will also need a shovel, tape measure, broom and some good gloves. Steel-toed boots are recommended any time you work with concrete.

• Although a hand tamper may be sufficient for compacting small jobs, a vibratory plate compacter will ensure that your crushed-rock leveling pad, drainage aggregate and backfill are compacted thoroughly and evenly.

• A large mallet is good to use for tapping units into place. A brick hammer can be used to modify the texture and to set your pins.

• For splitting units while maintaining a split-face texture, such as for corners, you will need a masonry chisel and a 4-pound sledge hammer. If you plan to do a lot of splitting, consider renting a mechanical splitter.
View our available accessories here